Wednesday, November 5, 2014

Pedestrian Traffic

Pedestrian Traffic
Forklift operators should always be aware of conditions in their workplace, including pedestrian traffic. Forklift traffic should be separated from other workers and pedestrians where possible.

Potential Hazards:
  • Danger of striking pedestrians and objects
Requirements and Recommended Practices:
  • Yield right of way to pedestrians.
     
  • When a person or group of people walks across your planned route:

    • Stop.

    • Wait until the pedestrians pass by.

    • Proceed cautiously through any congested area.

  • If an area is cluttered, walk the route first to spot problems.

    • Check for situations that require a spotter and use one when traveling.

    • Warn pedestrians, by asking them to move, if there is not sufficient safe clearance.

    • Sound the horn at blind corners, doorways and aisles.

    • Sound the horn or other alarm when you back up.
Yield right of way to pedestrians.
Figure 2. Yield right of way to pedestrians.

Slow down, stop and sound horn at intersections and wherever your vision is obstructed.
Figure 3. Slow down, stop and sound horn at intersections and wherever your vision is obstructed.
Reminders for the Driver:
Sign posted in area with high pedestrian traffic.
Figure 4. Sign posted in area with high pedestrian traffic.
  • Slow down, stop and sound horn at intersections, corners, and wherever your vision is obstructed.
     
  • When provided, use flashing warning light or backup alarms when traveling in reverse.
     
  • Do not move the truck if you do not have a clear view of travel.
     
  • Use a spotter for blind spots.
     
  • Always look in the direction of travel.
     
  • Keep a clear view.
     
  • Start, stop, travel, steer and brake smoothly.
     
  • Signal to pedestrians to stand clear.
     
  • Do not allow anyone to stand or pass under the load or lifting mechanism.
     
  • When possible, make eye contact with pedestrians or other forklift operators.
Reminders for the Pedestrians:
  • Be aware that lift trucks cannot stop suddenly. They are designed to stop slowly to minimize load damage and maintain stability.
     
  • Stand clear of lift trucks in operation.
     
  • Avoid a run-in. The driver's visibility may be limited due to blind spots.
     
  • Be aware of the wide rear swing radius.
     
  • Use pedestrian walkways, or stay to one side of the equipment aisle.
     
  • Never ride on a forklift, unless authorized and the forklift is designed for riders.
     
  • Never pass under an elevated load.
Reminders for Plant Safety Managers:
  • OSHA requires that permanent aisles and passageways be free from obstructions and appropriately marked where mechanical handling equipment is used. [29 CFR 1910.176(a)]
     
  • Consider separating pedestrians from lift trucks by providing:

    • Pedestrian walkways,

    • Permanent railings or other protective barriers,

    • Adequate walking space at least on one side, if pedestrians must use equipment aisles,

    • Pedestrian walkway striping on the floor, if barriers cannot be used.

  • Install convex mirrors at blind aisle intersections.
     
  • Post traffic control signs.
     
  • Post plant speed limits.